Water filtration and boiling-water taps
Choose the system around your water, space and intended use
Bumfords assesses suitable drinking-water filtration, reverse-osmosis and boiling-water-tap enquiries across South Yorkshire and surrounding areas. We consider the existing plumbing, available space, equipment requirements and future filter maintenance before confirming a solution.
Start with the required result
Water-treatment equipment is not one universal product
Some customers want to reduce particular tastes or odours. Others want a dedicated filtered drinking-water tap, a reverse-osmosis system or the convenience of filtered boiling water.
The appropriate route depends on what you want the equipment to do, how much water will be used, the available cupboard space and the existing plumbing arrangement.
Product selection also affects flow rate, filter-replacement frequency, drainage, electrical requirements and the amount of space required beneath the sink.
Genuine installation experience
Plan the equipment and future filter access together
A filtration installation needs more than a connection to the cold-water supply. The filter housing, valves and connecting pipework should be positioned securely while remaining accessible for future cartridge replacement and inspection.
Available cupboard space, stored items, shelves, waste fittings and other appliance connections can all affect the proposed arrangement.
Photographs beneath the sink help us assess these points before an appointment is confirmed.
Choose the closest requirement
Filtration, reverse osmosis and boiling water
Drinking-water filtration
Point-of-use filtration can provide a separate filtered-water outlet or form part of a compatible kitchen-tap arrangement.
- Under-sink filter systems
- Dedicated drinking-water taps
- Compatible multi-function taps
- Replacement installations
- Accessible cartridge positioning
Reverse-osmosis systems
Reverse osmosis uses a membrane-based process and normally requires more planning than a simple cartridge filter.
- Incoming-water connection
- Membrane and pre-filter stages
- Storage tank where applicable
- Waste-water connection
- Pressure and space considerations
Boiling-water taps
Boiling or near-boiling-water systems require careful positioning, suitable services and a clear understanding of safe operation.
- Boiler-tank positioning
- Filtered cold-water options
- Electrical requirements
- Ventilation and service access
- Controls and safe handover
Equipment options
Select equipment around the individual requirement
Monarch Water Filters is one of the manufacturers whose equipment may be considered for suitable Bumfords water-treatment enquiries.
Bumfords is not restricted to one manufacturer. The proposed equipment will depend on the incoming water, intended use, expected demand, available installation space and future replacement-filter requirements.
Any stated filtration performance, capacity or maintenance interval will be based on the relevant manufacturer’s current product information.
Discuss a filtration system
Assessment before installation
The cupboard beneath the sink determines what is practical
Space and accessibility
Tanks, cartridges, membranes, valves and connecting pipework all require space. Equipment should remain accessible for future filter changes, inspection and maintenance.
Waste bins, appliance connections, shelves and drawer mechanisms can substantially reduce the available area.
Water, drainage and electricity
Requirements vary by product. Some systems need only a suitable cold-water connection, while others may require drainage, a storage vessel or an electrical supply.
These requirements should be identified before equipment is ordered or an installation date is agreed.
Flow, capacity and usage
A system serving one household does not necessarily suit a busy office or staff kitchen. Flow rate, recovery time, storage capacity and expected daily use all matter.
Equipment already purchased
Customer-supplied equipment can be considered, but compatibility, condition, installation instructions, required services and the division of warranty responsibility must be checked first.
From enquiry to handover
Confirm the equipment and installation requirements first
Describe the result
Tell us whether you need filtered drinking water, reverse osmosis, boiling water or help with an existing system.
Review the location
Photographs and dimensions help identify space, pipework, drainage and electrical considerations.
Agree the equipment
The proposed system, supply responsibility, included plumbing and future consumables are established.
Fit and explain
The agreed equipment is installed and its controls, isolation and maintenance requirements are explained.
Plan for the complete ownership period
Installation is only the beginning
Replacement filters
Filter and membrane replacement intervals depend on the equipment, water conditions, usage and manufacturer instructions.
Existing systems
Before accepting service work, we need the make, model, age, symptoms and availability of compatible replacement components.
Safe operation
Boiling-water equipment must be used according to its instructions. Controls and safety features should be understood by everyone likely to use the tap.
Related services
Continue with the relevant Bumfords service
Common questions
Water filtration and boiling-water-tap FAQs
Which type of water filter do I need?
That depends on the result you want, incoming water, expected use, available space and preferred maintenance requirements. We begin by identifying the requirement rather than assuming that one system suits every property.
What is a reverse-osmosis system?
Reverse osmosis uses a membrane-based process. A typical installation may include pre-filters, a membrane, storage equipment and a waste-water connection. The exact arrangement depends on the product.
Can you install equipment I have already purchased?
Customer-supplied equipment can be considered, subject to checking suitability, completeness, condition, installation instructions and compatibility with the existing services.
Can you replace filters in an existing system?
Existing systems are considered individually. Please provide the manufacturer, model, approximate age and photographs so compatible components and service suitability can be checked first.
Does a boiling-water tap need electricity?
Most systems that heat and store water require an appropriate electrical supply. Exact power, positioning and ventilation requirements depend on the selected manufacturer and model.
Can these systems be installed in an office?
Suitable smaller commercial installations can be considered. Capacity, number of users, operating pattern, maintenance and responsibility for safe operation should be established first.
Will filtration make my water healthier?
Bumfords does not make general medical or health claims for filtration equipment. The system should be selected around a clearly defined requirement and the manufacturer’s stated performance information.
Start with the requirement
Tell us what you would like from your drinking water
Send your postcode, intended use, existing equipment details and photographs beneath the sink. We will review the information and recommend the appropriate next step.